Finder relay installed in electric vehicle charging stations or applications requiring high switching power.
New power relay installed on PCB 68.22.9 xxx. The 4300 has two 100A normally open contacts and an AC1 rated load of 40000 VA.
New power relay
Due to its special design and specific technical characteristics, finder68 series power relay allows switching high loads, which makes it very suitable for applications related to energy production and distribution.
Specifically, the equipment can be used for the construction of charging stations up to 55 kW, the design and production of inverters, battery chargers, generators, and equipment related to renewable energy. Generally, it can also be installed in uninterruptible power supply (UPS), pump control panel and internal automation control panel, such as elevators and heavy-duty elevators.
68.22 type power relay is suitable for installation on PCB circuit board. Because it has two normally open contacts, it allows switching three-phase neutral load (if necessary) up to 100 a, and only two relays are connected in parallel, thus saving circuit board space.
Characteristics and advantages of new finder power relay
In the specific field of application and market demand of 68 series power relay, the combination with finder is carefully analyzed to design the construction of proprietary relay.
In addition to the structure completely made in Italy, the new 68 series has low absorption, retention force of only 0.7W, small size and modern design.
Since the distance between open circuit contacts is 3.6 mm, it complies with VDE 0126-1-1 and en 62109-1 standards, as well as en 60335-1 standards on heat resistance and fire resistance (GWIT 775 ° C and gwfi 850 ° C).
Additional functions of model 68.22-4300:
Contact 2 no 100 a
The voltage is 12 and 24 VDC
The maximum switching voltage is 400/690 V AC
The rated load is AC1 4000va
Air, sliding distance 8 mm
The contact material is AgSnO2
The ambient temperature is -40... 85 ℃
Can be installed on PCB circuit board